Timber
PAKISTAN MARKET REQUIREMENTS
Sawn Soft Wood Types Finnforest White Wood and Red Wood (Fir, Spruce, Pine,)
S4S, KD and PTG (Mainly White Wood)
?Specification Thickness: 18mm N up,
Width: 34mm N upThickness: 25mm to 300mm
(Rough Sawn Timber)Width: 100mm N up to 300mm
?Length Length 2.10 Mtrs N up
Sawn Hard Wood?Types Keruing, Yellow Meranti, Red Meranti, Red OAK
?Size for Yellow Meranti 5" x?2", 7" x 2"
?Length ?7 ft N 10 ft N Up
?Size for Keruing (4",?", 6")?x?(8" - 12")
Length ?12 ft N Up ?
Soft Wood Logs Types Fir, Spruce, Pine
Length 3, 4 meter N Up ?
?MLH, KRG
Dia ? 60 cm N Up
Length 4 meters N Up
Timber allied
Pakistan Market Requirement
Types Oak , Ash and Teak?
Thickness 3 mm , 3.6 mm, 18 mm
Size for Plain 8 x 4 ?
Size for Door Skin (Commercial Plywood) 7 x (2.25 , 2.5 , 2.75 , 3 , 3.25 , 3.5 ,4 )
Quality Commercial Plywood (MR DBB/CC) and Fancy Plywood "A" Grade
Types
Plain and Decorative
Thickness 2.5 mm, 3 mm,?mm,?5.5 mm,?8mm, 11 mm, 17mm, 18mm
Size 8 x 4 ?1220 mm x 2440 mm)
Quality "A" Grade
Size for Molded/Smooth Door Skin (MDF/HDF) 7 x (2.25 , 2.5 , 2.75 , 3 , 3.25 , 3.5 , 4 )
Quality "A" Grade
Types Plain and Decorative?
Thickness 3 mm & 18 mm
Size 8 x 4 牋(1220 mm x 2440 mm)
Quality "A" Grade
Types Plain and Decorative
Thickness 2.5 mm, 3 mm, 3.2 mm, 3.6 mm, 4mm, 5mm, 6mm
Size 8 x 4 牋(1220 mm x 2440 mm)
Quality Standard "A" Grade (3 mm and 3.2 mm, Suitable for High Pressure Melamine Lamination)
Types Mineral Fiber
Thickness
12 mm & 15 mm
Size 2 ft x 2 ft?603 mm x 603 mm)
Quality Standard
Types Plain and Decorative
Thickness 9 mm & 12 mm
Size 8 x 4 牋(1220 mm x 2440 mm)
Quality Standard
Types Melamine Laminated and Hard wood
Thickness 7 mm, 8 mm
Quality Standard
Types Raw and Melamine Impregnated
Density 65 - 105 gm.
Quality Standard
Types Raw
Grammage 146 gms/cm2 (For High Pressure Laminates)
Types Engineered Wooden Block and Natural燬liced
Thickness for Sliced 0.15 mm- 0.3 mm
Length 7 and 8
Size for Engineered Wooden Should be suitable to produce 8 x 4 Panels?
Species OAK, White Ash, Teak
Types Ivory Face
Thickness 12 mm
Size 8 x 4 牋(1220 mm x 2440 mm)
Mitone
Mitone
Design Availablity Fissurred & Pin point (Available at this stage but the main imports and requiremnt from this market is for Fissurred ) though the company has other designs also ,and they can be imported on prior requirement by (Imported thru Requirement )
Sizes 2 x 2 = About 4 Sq.FT (Thickness - 12mm ,15mm as per requirement)
603mm x 603mm
Packing 12 pcs in a 1 Box
|
收費會員：
免費會員：
還不是會員？
